Čtečka RFID karet a čipů MIFARE 13,56MHz pro snadnou integraci přístupových prvků do systému přístupových systémů a řídících jednotek. Možné použít i při instalaci přístupových vyhodnocovacích jednotek.
Specifikace od výrobce:
-
Product Parameter
Parameter Description
Read Range
DR10E Up to 10CM; DR10M Up to 5CM
Power / Current
USB 5V DC / Max.100mA
Input Port
2ea (External LED Control, External Buzzer Control)
LED Indicator
2 Color LED Indicators(Red and Green)
Beeper
Yes
Operating Temperature
-10° to +70°C
Operating Humidity
10% to 90% relative humidity non-condensing
Material
ABS+PC with texture
Dimension
140*100*30mm
Weight
120g
Návod ZDE
SW ke stažení ZDE
ⅡInstructions for use
Method of installation and use
1. Connect with computer through USB interface directly. When the buzzer sounded, reader into the self-inspection. And the same time, LED turn into red means standby.
2. Open the output of computer software,such as Notepada word document or Excel sheets.
3. The mouse in Notepad or WORD document clicking.
4. Put tag on the top of reader, the software will output a data(card number) of the tag. When reading the tag, LED light change from red to green.
Detecting device is connected
Open the Device Manager of computer, If appears Humans Input Device that means Reader has successfully into computer.
Ⅲ Precautions
1. Do not install the reader on the magnetic objects and metal objects, they will seriously affect the RF signal.
2. If after reading, the tag is still in the induction zone, the RF reader will not send data and without any hints.
Ⅳ Common problems
1. Operation without feedback: Please check whether the interface plugged in, whether the tag is a valid or whether another RF tag is within the reading range.
2. Data error: Please check Whether the mouse is moved, whether the reader is in a critical state and whether the cable length is too long.